Because the exterior of this fast car can hardly be improved, the team at the company ANDERSON GERMANY - with their headquarters in Düsseldorf - have concentrated more on the interior than on the small visible external "details" and this has given them room to go all out.

Small visible details would include the tint of the tail lamps and the panes. Alone the description of the exclusive three-part rims with specialty lacquering would be enough to fill more pages than we have space for here. To sum up: these are specially lacquered rims, 8.5x20 and 11.5x20 inches in size, soled with high performance tyres measuring 235/30-20 at the front and 305/25-20 at the back. Although they are not immediately visible, this is more than made up for by the audible exhaust system, which can be adjusted with a remote controlled, three-step valve control.

In the completely refined interior the logo-decorated seats and the generously built Carbon in White are an absolute feast for the eyes. It is worth mentioning the increased performance of the engine, from 550 PS to 590 with an even higher maximum torque.

The company ANDERSON GERMANY is an elite tuner, which turns luxury cars into truly one of a kind vehicles. The vehicles are of course fine-tuned for the stars of this world according to their special requests, inside as well as outside. A special pick-up service is offered to do this, regardless of the car's location. Naturally, the final product is delivered to the same place.

We offer exclusive rims, complete lacquering or film coating, carbon finishing, specially manufactured exhaust systems, increased performance, interior finishing to the finest degree as well as high end multimedia solutions.

For more information see the ANDERSON GERMANY's detailed program: www.anderson-germany.com

Therefore, they turn both the Coupé and also the Spyder into the GT600 which has a stronger performance, more self-confidence and looks more aggressive.

The refined appearance immediately catches the eye with the new aerodynamics kit which BF-performance produces entirely in carbon. The elaborate processing of this high-performance material combines extremely light weight with supreme durability. This allows the Lamborghini specialist to implement an optimised aerodynamics concept.

At the front, this shows in voluminous air inlets of the especially developed front spoiler which follows the shape of the Lamborghini top model Reventón. This way, BF-performance does not only improve the driving behaviour, but also gives the Gallardo a significantly aggressive appearance and an increasingly racy look.

Optimised under-body aerodynamics is guaranteed by the side skirts and the rear diffuser which are both also made of carbon. The striking carbon rear wing renders additional down thrust. Its edged design perfects the design language of the Lamborghini and gives the Gallardo the finishing touch.

The wing doors render a significant amount of individuality, but are strictly limited to Lamborghini models with twelve-cylinder engines. Due to the refinement by BF-performance, also the GT600 with a V10 engine can be equipped with doors which are so typical for Lamborghini.

And of course the engineers also focused on the engine performance. BF-performance has confirmed the performance of the new automobile in an impressive race. On the Sachsenring round course, the GT600 even managed to beat the stronger Lamborghini Murciélago LP640-4 SV by an impressive lead of 0.6 seconds.

For the special individualisation, BF-performance offers a unique amendment: it can be modified from a four-wheel drive car to a rear-drive super car. This way, the GT600 combines the exclusive feature of the Gallardo LP550-2 “Valentino Balboni“ with increased performance. The new engine concept and 43 kilogramme of saved weight render a unique driving experience.

The interior also follows this dynamic maxim. Apart from the sports bucket seats, BF-performance also offers five-point belts, a roll-over cage and a carbon-ceramic braking system with which the GT600 meets the highest racing standards. BF-performance visually adjusts the interior to the increased dynamics. The manufactory uses carbon on the steering wheel, door handles, ventilation grids and even at the switch casings. The customer can even opt for carbon in his favourite colour.

BF-performance offers the entire car with all components either as the sporty Coupé GT600 or also as the Roadster GT600 Spyder.
The entire automobile confirms the perfection and passion for detail applied by BF-performance. The Lamborghini specialist has already gained experience with the predecessor model and now brings its art of engineering into perfection with the GT 600. Also Lamborghini’s design development confirms the talents of BF-performance, as the Swiss specialist is always one step ahead of the Italian manufacturer.

For more information, please visit the web site www.bf-performance.com or write an e-mail to info@bf-performance.com. Apart from the Gallardo, BF-performance also refines further Lamborghini models such as the Diablo, the Gallardo models from 2003 to 2009, the following Gallardo from 2009, the Murciélago from 2003 and the LP640 from the year 2007.

With this kit - consisting of side skirts, rear wings, front apron, bonnet, side mirrors and rear grill - Give your Lamborghini Gallardo a brutal look of an exclusive Lamborghini Reventon. There are a lot of Glossy-Carbon components like air intakes, rear diffuser and spoiler sword. The Side Skirts, rear apron and front apron is available in Carbon and in Fiberglass. All the parts are a made in Germany and immediately available.

CDC International produces the highest-quality technology, design and individuality to perfection, from the detail up to the Complete installation according to your wishes. And it combines high tech and manufacturing know-how.

CDC Internation offers an extensive retrofitting of rims in 19/20 inch, tires, wheel sets, and aerodynamic body parts, chassis, brakes, interior finishing and performance tuning up to 800 HP for your sports car.

For more information please visit: CDC International.

Compared with the already lean Gallardo LP 560-4, the weight of the Gallardo Superleggera has been trimmed by 70 kilograms (154 lb). The super sportscar from Sant'Agata Bolognese boasts a dry weight of no more than 1340 kilograms (2954 lb) - the lightest road-going model in Lamborghini's range, and a new arrival in one of the most exclusive market niche segments.

One key factor is the exterior and interior components made from carbon-fiber. Carbon-fiber is ideal for the manufacture of sportscars as its use allows for weight reduction and improved mechanical features. The car's performance is thus enhanced thanks to a better weight-to-power ratio and reduced total mass, which means that CO2 emissions are also lower. Lamborghini has been at the forefront in this material's application for many years, and now the brand is extending its leadership even further.

The V10 power unit with 5.2 liters (317,6 cu in) of displacement generates 419 kW (570 CV*) in the Gallardo Superleggera. This puts the weight-to-power ratio of the new top model at only 2.35 kilograms (5.18 lb) per CV and guarantees breathtaking performance. The Gallardo LP 570-4 Superleggera handles the dash from zero to 100 km/h (0-62 mph) in 3.4 seconds and flies past the 200 km/h (124 mph) mark only 10.2 seconds later, ultimately reaching 325 km/h (202 mph). The engine with "Iniezione Diretta Stratificata" gasoline direct injection also boasts an impressive degree of efficiency. Its fuel consumption and CO2 emissions have been reduced by 20,5 percent compared to the previous model.

The Gallardo Superleggera is an uncompromising driving machine. Its running gear, with its mighty braking system, has a dedicated and exceptionally precise set-up, while its 19-inch wheels, Pirelli P Zero Corsa, clad in Pirelli sports rubber, are extremely light. The Lamborghini Gallardo LP 570-4 Superleggera brings a whole new meaning to the term "super sportscar".

Design and aerodynamics:

The beauty of power
The elegance of every Lamborghini rests on both its extreme power and precise functionality. The Gallardo LP 570-4 Superleggera's bodyshell is sculptured and completely free from stylistic additions. Dimensions define the contours of a dynamic wedge - 4.39 meters (172,7 in) long, 1.90 meters (74,8 in) wide, but only 1.17 meters (45,9 in) high.

Exterior modifications are all directed at increasing aerodynamic effects. Working closely with wind tunnel experts, the designers from Lamborghini's Centro Stile remodeled the front bumper - three-dimensional, deeply recessed elements form trapezoidal frames for the large air intakes. Together with the V-shaped, sharply defined nose and the LED daytime running lights, the black elements give the front end a razor-sharp look, reminiscent of Lamborghini's top model. The new design increases the supply of cooling air and improves the downforce on the front axle.

The modifications to the fully-covered underbody, which include new sill elements and a redesigned diffuser incorporating four large tailpipes, help to achieve better aerodynamic results. The Gallardo Superleggera sports a small rear spoiler as standard. A big rear spoiler is available as an option.

The bodyshell:

Intelligent lightweight engineering
The model on which the Gallardo LP 570-4 Superleggera is based, the Gallardo LP 560-4, is already a prime example of Lamborghini's lightweight engineering philosophy, with its dry weight of 1410 kilograms (3108.5 lb). Its bodyshell is made from aluminum, with moulded node elements and extruded parts forming an extremely stiff framework into which the aluminum panels are integrated. The spaceframe structure is impact-resistant and forms the basis for the super sportscar's precise handling.

Against this background, the task of reducing the weight by a further 70 kilograms (154 lb) presented a huge challenge to Lamborghini engineers - the target figure, a weight-to-power ratio of 2.35 kilograms (5.18 lb) per CV, sets a new best among the competition. Lamborghini engineers handled the task as they usually do - with hi-tech competence and aesthetic flair.

The rear windshield and side windows are made from robust and resistant polycarbonate. The engine cover also includes a polycarbonate window, beneath which the V10 engine is displayed like a technical work of art. The long cover section runs from the roof to the rear of the vehicle and is made from carbon-fiber. Engineers also selected carbon-fiber for the rear spoiler, sills, diffuser, parts of the underbody paneling and the fine exterior mirror casings.

With its minimal weight and extremely high rigidity, carbon-fiber is the ideal material for a super sportscar. As far back as the 1980s, Lamborghini was already gathering experience in this field with the Countach. Today, some parts of the Murciélago's structure are made from carbon-fiber. In order to secure this leading position even further, the brand from Sant'Agata Bolognese established a center of excellence for carbon-fiber materials, where specialists are developing components, working with efficient manufacturing technologies.

Lamborghini's carbon-fiber strategy is further proven by its foundation of the "Automobili Lamborghini Advanced Composite Structures Laboratory" (ACSL) at the University of Washington in Seattle, USA. Lamborghini provides support to the facility and its long-term, co-operative research work in the fields of aeronautics and astronautics, together with the composite materials' application within the automotive sector. Alongside the University of Washington, aircraft company Boeing is also among Lamborghini's partners.

The aircraft manufacturer commands enormous expertise in the field of composite materials. With the new Type 787 Dreamliner, Boeing has developed the world's first commercial aircraft built entirely from carbon-fibre. Thanks to its superior characteristics, it consumes around 20 percent less fuel than a conventional aeroplane.

The interior and the use of carbon-fiber
Altogether, carbon-fiber components make up 40 (88 lb) of the 70 kilograms (154 lb) saved on the Gallardo Superleggera. In the interior, too, engineers aimed to reduce weight as much as possible. The center tunnel cover, the door panels and the surround of the e-gear automated manual transmission lever are made from carbon-fiber. The high-end material is also used for the sports seats' shells. They make a significant contribution to the overall weight reduction.

Just like the rest of the cockpit, the sports seats are clad in lightweight Alcantara instead of leather. At Lamborghini, weight reduction is in no way synonymous with sacrifice - the Gallardo LP 570-4 Superleggera is still equipped with air conditioning and electric powered windows as standard.
Lamborghini has built on this strength - the interior is crafted with passionate attention to the tiniest detail; high quality materials indulge both visually and sensually.

The interior, including roof and mats, retains the Lamborghini Gallardo's black finish. As a contrasting color for elements such as seat trims and stitching, customers can choose among green, yellow, orange and two shades of gray. They match exterior paint finishes in Verde Ithaca, Giallo Midas, Arancio Borealis, Grigio Telesto, Nero Noctis and Bianco Monocerus.

Power & transmission:

The engine
10.2 seconds from zero to 200 km/h
In the Gallardo LP 570-4 Superleggera, LP stands for "longitudinale posteriore" and refers to the orientation of the V10 engine - which is mounted longitudinally behind the driver, just like every Lamborghini engine. The number 570 refers to the maximum power output in CV, which equates to 419 kW and is available at 8,000 rpm. Equally impressive is the pulling power - the torque curve peaks at 540 Nm (398,3 ft lbs) at 6,500 rpm. The increase of 7 kW (10 CV) is the result of the new dedicated engine management strategy.

The V10 has a displacement of 5204 cm3 and achieves a specific output of 80.5 kW (109.6 CV) per liter. Special features on this long-stroke engine with an aluminum crankcase include dry sump lubrication and a cylinder angle of 90 degrees. Both solutions lower the center of gravity, thus improving the handling dynamics. To ensure an ideal combustion chamber fill, the engine has an adjustable intake manifold and continuous control of the chain-driven camshafts.

The crankshaft is conceived as a dual-plane crank - the connecting rods of opposing pistons share one bearing. This configuration delivers alternating ignition intervals of 54 and 90 degrees; a unique sequence that is the reason for the compelling, racing car-like sound of the V10. As the revs rise, resounding bass notes are overlaid with razor sharp harmonics.

The powerful V10, combined with the model's weight reduction, gives the Gallardo Superleggera LP 570-4 breathtaking performance. The car accelerates zero to 100 km/h (0-62 mph) in just 3,4 seconds, 0 to 200 km/h (0-124 mph) in 10,2 seconds - then continues relentlessly to its top speed of 325 km/h (202 mph).

The Gallardo Superleggera is also considerably more efficient - compared with its predecessor, its fuel consumption in the EU driving cycle is reduced by 3,5 liters per 100 kilometer (0,9 gal), or 20,5 percent, to 13,5 liters/100 km (16 mpg). This improvement is partly due to the "Iniezione Diretta Stratificata" gasoline direct injection, which injects fuel into the combustion chambers at pressures of up to 100 bar. The tumbling mix cools the combustion chambers, which enables a very high compression ratio of 12.5:1 which, in turn, increases efficiency.

Traction without compromise
The Gallardo LP 570-4 Superleggera comes with the e-gear transmission operated via steering wheel paddles, as standard. The automated system with electronic management shifts through its six gears extremely smoothly and far more quickly than could be achieved by human reflexes.
The e-gear control unit has three operating modes, two of which available in automatic. The "Thrust mode" delivers maximum off-the-line performance and is programmed to manage starting revs of around 5000 rpm with minimal wheel slip.

Every single kilometer in the new Superleggera is utterly thrilling - not least because of the relentless traction in practically every situation. This is largely attributable to the four driven wheels, as indicated by the number 4 in the model name. The permanent all-wheel drive integrates a central viscous coupling and a 45 percent limited slip differential on the rear axle. In normal circumstances, the power delivered by the V10 is channeled with a ratio of 30:70 to the front and rear axles. The weight distribution of the superlight Gallardo is 43/57 percent front/rear.

In 1993, the Diablo VT was the first Italian super sportscar with an all-wheel drive set-up, and Lamborghini has been steadily consolidating its leadership ever since. In fact, thanks to the car's superior traction, Lamborghini drivers can accelerate earlier out of a bend than drivers of rear-wheel drive cars.

The running gear:

Even firmer, even more precise
The new Gallardo Superleggera is a highly-concentrated driving machine - it thrills with breathtaking cornering speeds and fast, immediate feedback. Its handling is always precise, stable and predictable. The running gear layout is derived directly from Lamborghini's motorsport experience. The suspension is aluminum double wishbones. The precise rack and pinion steering keeps the driver very closely connected with the road. The shock absorbers are extremely firm, and the anti-roll bars and suspension mounts have been further reinforced: these features enable the running gear to reach its full dynamic potential. No other model in the Gallardo range is as close to a race car as this one. The development of the Superleggera was heavily influenced by experiences gained from the world's fastest single-brand race series, the Lamborghini Blancpain Super Trofeo.

Another special feature of the Gallardo Superleggera is the wheels. The 19-inch units are aluminum forged and are therefore extremely lightweight - saving 13 kilograms (28.6 lb). The wheel bolts are made from titanium and are also incredibly light and rigid. The tires are 235/35 ZR19 at the front and 295/30 ZR19 at the rear and come from the Pirelli P Zero Corsa series. Developed specifically for the new top model in the Gallardo range, they are closely related to pure race rubber.

Behind the huge wheels are brakes that serve to deliver uncompromising stopping power and are managed by the standard-fit ESP stability control system. The front wheels are served by aluminum eight-piston calipers, with four-piston units at the rear. The ventilated brake discs have a diameter of 365 and 356 millimeters (ø 14.37 x 1.34 in and 14.02 x 1.26 in) respectively. As an optional extra, Lamborghini can fit extremely fade-resistant and lightweight discs made from carbon-fiber ceramic with six pistons at the front. The front ceramic discs have a diameter of 380 millimeters (ø 15 x 1.5 in).

Equipment:

Hi-tech for road and track
Alongside its specialized carbon-fiber lightweight components, the Lamborghini Gallardo LP 570-4 Superleggera is delivered ex-works with an array of other high-end features. Highlights include the e-gear transmission - a manual gearbox is also available at no additional cost - the dedicated set-up, the Pirelli sports tires and the sports seats. Alcantara upholstery and a hand-stitched steering wheel also set the interior ambiance.

The range of special equipment is particularly sporty. It includes carbon-fiber ceramic brake discs, four-point seat belts, fire extinguisher and a steel roll cage. Visual impact can be further increased by a rear spoiler and the engine bay for the engine compartment - both from carbon-fiber - as well as colored brake calipers.

For the interior, Lamborghini offers special floor mats and leather steering wheels, a storage package and an alarm system. An additional carbon-fiber package includes center console and instrument panel trim, the parking brake handle, parts of the steering wheel and the door handles. A LED light package illuminates the engine compartment, the interior, and the entry area.

Additional features of special equipment increase comfort, such as the multimedia navigation system, the lifting system which raises the front of the car to enable driving over obstacles, a remote control for opening garage doors and a rear view camera mounted beneath the rear spoiler. Customers who want to personalize their Gallardo LP 570-4 Superleggera, can use Lamborghini's wide-ranging options of the "Ad Personam" individualization program.

edo competition has managed to improve performance by increasing power output to 600 horsepower at 7,970 rpm and the torque output to 572 Nm (422 ft-lb) at 6,845 rpm.

Another priority was to upgrade the suspension in order to improve drivability, driving dynamics and precision. edo competition achieved this by employing a newly developed sport suspension system, which is adjustable in compression and rebound damping. This technology allows for custom suspension setups that are ideally matched to a wide range of needs. The low friction shock absorbers and new spring rates were tested extensively on race tracks and high speed ovals, as well as on the road, because handling is not an area for compromise. The result has to be experienced to be believed...

Rounding off the sporty concept are 19 in. three-piece racing wheels with artificially-aged cast center-sections, hand-polished outer rims and 39 stainless steel screws. For the front axle the customer can specify stock tire dimensions or 235/35 ZR 19, while the rear wheels are shod with 305/30 ZR 19 Dunlop Sport Maxx rubber. With this solution edo competition enables its customers to reuse the factory tires on their new wheels.

Another, ever-intriguing topic at edo competition: „The voice“.
The new stainless steel high-performance exhaust system with butterfly valves is an attractive proposition. Not only is the sound level adjustable via remote, the exhaust also frees up 15 horsepower and lets the driver enjoy a whole new aural experience. As a welcome side effect, the edo exhaust system weighs 12 kg (26 lb) less than the original piece.

As a result of years of experience with high speed tests, edo competition has reinforced the front end of the edo LP600/4 with a new front spoiler lip, making 340 km/h (211 mph) runs into a relaxing affair.

As promised, lots of extra spice …

As with all edo competition models, we set no limit to our customers’ imaginations. Special interiors or lavish leather upholstery, individual requests are accommodated and executed with quality.

All modifications are carried out exclusively at edo competition Motorsport GmbH in Ahlen.

Contact: edo competition Motorsport GmbH; Ruth Holtbuer; Zeche Westfalen 1; 59229 Ahlen
Phone: +49-2382/9698 - 182; Fax +49-2382/940568; E-Mail: r.holtbuer@edo-competition.de

Donckerwolke's courage in producing such clear-cut shapes and his ability to combine them in a harmonious whole has earned him the renowned red dot design award for the Gallardo and its big brother Murcielaga, which has been following the same design concept since 2001.

As time went on, the sports car manufacturer from Sant' Agata, Bolognese, launched a range of Gallardos including an open-top Spyder and the lightweight and high performance "Superleggera". In 2008, the Italian firm finally carried out some fundamental technical and optical modelling on its "small" sports car, also improving the styling even further. The front section of the V10 racer, now known as the Gallardo LP 560-4, has since been even more aggressive.

Known for its stylish finishing, ENCO Exclusive from the Saxon town of Chemnitz has now created a customised carbon fibre glove for the Gallardo LP 560-4's lean mean body. The GT3 design front bumper is 100% carbon fibre and has three large gills on each side where the fibre strands are clearly visible. Two additional carbon fibre finish aerodynamic components are available to fit both this and the series bumper: the front splitter and the rear spoiler. The GT3 side skirts may be unobtrusive, but they make the Lamborghini as a whole appear even bigger and stronger. The boot cover for this mid-engine racer- what in normal cars is the engine hood - is also ultra-lightweight but highly resilient carbon fibre. The rear diffuser, wing mirrors and air vents in the boot lid are finished in carbon fibre laminate. Top quality matt foil adds the finishing touches, giving the angular Gallardo the look of a stealth fighter plane. ENCO Exclusive has also had a field day with carbon look laminate in the interior. The inlay on the wheel, the cover on the central console and dashboard and the handbrake shine in silvery black - as do the door handles and openers.

Enco has also been at work on the 5.2 litre V10 engine. After some serious power treatment, the ten cylinder with its menacing roar now reaches not 560, but an impressive 620HP. The maximum torque is now up from 540 to 575 Newton metres.

Prices

100% carbon fibre GT3 front bumper: 2990 euros
Carbon fibre finish front splitter for series and GT3 bumper: 990 euros
Carbon fibre finish rear spoiler for series and GT3 bumper: 1990 euros
Carbon fibre finish GT3 design side skirts: 3990 euros
Carbon fibre finish boot cover: 3990 euros
Carbon fibre laminate for rear diffuser, mirrors and boot lid vents: 4000 euros
Carbon fibre interior finish: 5000 euros
Matt black foil: 3000 euros
Power increase to 620 HP / 575 Nm: on request

Full details, prices and delivery information are available from: www.enco-exclusive.de

For the Gallardo LP 560-4 the German Lamborghini specialists have once more taken the speedy Italian car and created a masterpiece on wheels in accordance with the IMSA company philosophy. For the Gallardo LP 560-4 the IMSA engineers had to take the special chassis from the GTV‘s well known predecessor and completely reconstruct it.

Thus the chassis modifications now include a front skirt, widened wheel housing for front and rear, sideskirts, a rear skirt as well as special rear spoiler that ensures greater output. All the parts are made of high quality carbon fibre which normally can only be found in professional motor sports or in air travel and which despite its low weight has a convincing stability. Because of its superb technical specifications the IMSA GTV is capable of combing sportiness with an exclusive appearance at the highest level. The same can, of course, also be said for the already internationally established lightweight central locking wheel, IMSA Challenge, which is mounted on the front axle with dimensions of 9J x 20 (with 245/30 ZR20 sized tires) and on the rear axle with dimensions of 12,5J x 20 (with 325/25 ZR20 sized tires).

The IMSA exclusive wheel is not only visually an eye-opener but it also convinces the ambitious driver with its technical characteristics – especially when combined with the very complex traction and compression phase as well as with its height adjustable IMSA sports suspension. The highly polished IMSA stainless steel sports exhaust system can naturally not be left out of this Gourmet menu.

The optical delicacy on the rear of the LP 560 spoils the driver with a really deafening V10 symphony and increases its performance to a sensational 590 PS at 9000U/min thanks to the perfected exhaust gas routing and the connected back pressure reduction. The maximum torque is increased to 560 Nm at 6000 U/min.

As the IMSA GTV is a complete vehicle concept based on the Gallardo LP560-6 the IMSA specialists have also devoted themselves with their usual perfection to the interior of the vehicle. So the first things to strike the eye when opening the passenger door are the exclusive IMSA bucket seats made of carbon, which fi t the driver and co-driver like a sitting tailored suit. As the IMSA team traditionally consider the use of high quality materials for its newest super sports car creation to be very important,carbon is naturally used all over for elements in the cockpit. The complete multi-element IMSA carbon interior is very convincing. The whole IMSA GTV including the IMSA sports driving wheel is finished off with IMSA leather and/or Alcantara interior in GTV design.

All in all this is a very tasty high-class menu, that will make several Gallardo owners‘ mouths water. Please visit also the IMSA's new website: www.lamborghini-tuning.com

Deutsche decided to target Lamborghini customers that seek something a little more exclusive from an automobile that spells passion even in its original state. Thanks to Deutsche‘s Reventino Kit, Gallardo owners are now able to give their dream car a Jet-like look, similar to the much-hyped Reventon that was recently shown by Lamborghini on the IAA 2009.

The most significant difference is the newly designed front face that not only is much more aggressive due to it‘s individual spiky design but also minimizes the propulsion at the front axle. Additionally, the package is crowned with plenty of additional Carbon-Fibre parts that leave no room for disappointment: A stunning rear -diffusor & -spoiler that ensure perfect correction of drift, combined side-skirts & side-diffusors to give best roadholding, a breath-taking engine cover, airintakes and a lot more, showcasing Deutsche's love to the material.

Performancewise, Deutsche‘s engineers were able to get 30 more horse powers out of the Gallardo. A step on the gas will now let you feel an additional 20NM of torque resulting in 381KW of performance, approximately 5% increase to the regular version. Marius Kottas, Head of Deutsche's Marketing Department says: "The combination of luxury carbon-fiber parts with the newly designed Reventino look create a match made in heaven that will indulge existing Gallardinos as well as potential new owners. The kit will fit on both Gallardo versions, the old and the new ones."

About Deutsche Manufaktur:
Located in the beautiful city of Duesseldorf, Deutsche Manufaktur maintains a design office on the world wide renowned Koenigsallee, Germany's most prestigious boulevard featuring most top tier brands and banks. Stefan Baum, Deutsche's founder, has been actively involved in tuning Ferraris and Lamborghinis for many years before deciding to go commercial. Nowadays, the company's focus is on the refinement of luxury automobiles by creating dynamicly enhanced body Kits & car interiors. A strong focus on carbon fiber and special leathers like Ostrich define Deutsche's design character. For more information please visit: www.deutschemanufaktur.com